Welcome to the official website of Yingkou South Building Dongtai Refractory Company!


Contact us

Contact:Manager Liu

phone:+86 13840777765

address:China Liaoning Yingkou City Nanlou Dongtai Refractory Co., Ltd.

Website :  en.ykdtnh.com


High temperature furnace application range

Your current location : Home >> News >> company news

High temperature furnace application range


The high-temperature furnace is a national standard energy-saving cycle electric furnace. It is mainly used for heat treatment of alloy steel products, various metal parts, normalizing, quenching, annealing, etc., medium frequency furnace ramming or diamond cutting blades for high temperature sintering.

Application industry

(1) Thermal processing, cement, building materials industry, thermal processing or processing of small workpieces.

(2) Pharmaceutical industry: used for the inspection of medicines, pretreatment of medical samples, etc.

(3) Analytical chemical industry: As a sample treatment in the fields of water quality analysis and environmental analysis. It can also be used to carry out oil and its analysis.

(4) Coal quality analysis: used to determine moisture, ash, volatile matter, ash melting point analysis, ash composition analysis, elemental analysis. It can also be used as a general ashing furnace.

specific purpose

1. New solar energy materials, polysilicon, monocrystalline silicon, solar cells, industrial silicon, metallurgical silicon;

2. Lithium cobaltate, lithium manganate, ternary material, cobaltous oxide, lithium manganese phosphate, lithium iron phosphate, cobalt oxide, graphite anode, lithium titanate, solid solution system material, graphene;

3. Cobalt powder, ultra-fine nickel powder, solar cell, nickel-plated steel strip;

4. Ceramic filter, dielectric ceramic, piezoelectric buzzer, piezoelectric transformer;

5. Ceramic capacitors and chip capacitors;

6. Rare earth phosphors and color TV phosphors;

7, thick film circuit, chip resistor, focus potentiometer;

8, various powder metallurgy; metal heat treatment; cobalt chromium alloy (CoCr); transparent zirconia, titanium vanadium alloy, vanadium nitrogen alloy, iron-copper based powder;

9. Soft ferrite and permanent ferrite;

10. Automobile exhaust gas three-way catalyst, petroleum industry catalyst; friction material, anti-friction material;

11. Structural ceramics, alumina ceramic substrates, ceramic metallization;

12. Barium titanate, barium carbonate, barium carbonate, titanium dioxide, zirconium dioxide, germanium dioxide, germanium dioxide;

13. Heat treatment, coating and sealing of VFD glass; liquid crystal substrate glass;

14, varistor, ring varistor, thermistor;

15. Low bulk density copper powder, low bulk density high quality copper-tin 10 powder, brass powder, high lead, high tin copper alloy powder for automobile bushing, 6-6-3 bronze powder, tin powder, nickel powder , cobalt powder, spherical metal powder, etc.

16, anode cap, pin oxidation, VFD glass heat treatment, coating and sealing, liquid crystal glass substrate, metal parts reduction atmosphere heat treatment, lithium iron phosphate

17. Heat treatment processes for chip sealing, metal packaging, HTCC, DBC, VFD, PDP, automotive radiators, etc. under protective atmosphere, such as sealing, metallization, brazing, oxidation, annealing, etc.

18. Pre-burning, sintering and co-firing of microwave ferrite, magnetic materials, advanced ceramics, electronic components, powder metallurgy products, etc.

17. High-temperature sintering and heat treatment of thick film circuits, thick film resistors, electronic component electrodes, LTCC, steel heaters and the like.


This article's website:http://en.ykdtnh.com/news/420.html

Recent browse: