Magnesia brick is a very popular product on the market, and it is also a popular product. When making this product, the magnesia brick manufacturer needs to pre...

The molder must not only assemble the mold parts into molds that meet the tolerance requirements of the refractory bricks, but also must understand the design p...

The use of magnesia bricks can be said to be relatively extensive, and it can be applied very well in many cases. This is a very important product in the curr...

China's economic growth will change from quantitative to qualitative, that is, economic development will no longer rely on high input, high consumptio...

Light burnt powder is a highly active alkaline oxide obtained by calcining a magnesite at a certain temperature. It is usually processed into a fine powder ...

Fourteen problems of magnesium-aluminum bricks to be paid attention to in the construction of refractory magnesia bricksFirst, preparation before constructi...

Just recently, my friend wanted to buy a batch of electric furnace magnesia carbon bricks. At present, the problem he encountered is that he does not know the p...

In the consumption of energy (fuel, electricity, water, etc.) of various refractory products (except fused materials), magnesium chrome bricks, magn...

For magnesia bricks, some conditions of use are the use of high porosity and high gas permeability of the article. At present, steel mills widely use argon-...

Magnesia brick is an alkaline refractory material with magnesia content above 90% and magnesia brick as the main crystal phase. Generally, it can be divided in...

The load softening temperature of the magnesia brick manufacturer is much lower than the refractoriness, which is about 1500 °C. The reason is thermal expan...

For magnesia brick, some use condition is to use the high porosity of product and higher permeability.Ramming material, at present, widely used steel ladle ...

Magnesium brick (magnesite brick) is an alkaline refractory material with a magnesia content of more than 90% and a periclsite as the main phase. Generally, i...

For refractory practitioners, the market for regenerative bricks in recent years is not optimistic, and the depression in the steel market directly affects the ...

The refractory ramming material can be applied at normal temperature. For example, a thermoplastic organic material capable of forming a carbon bond is used ...

Compared with other amorphous materials, refractory ramming materials are loose or semi-dry loose, and most of them are non-adhesive before forming, so that onl...

Before construction, check the mixing and cleaning conditions of the mixing equipment, transportation tools, vibrating tools and parts to be poured; check th...

What is the difference between ramming and castables? First of all, these two products are all amorphous refractories. The ramming material is applied by beatin...

The high-temperature furnace is a national standard energy-saving cycle electric furnace. It is mainly used for heat treatment of alloy steel products, various ...

Different kinds of special refractory materials, although their chemical composition and structure are different, their performances also have certain d...